| General | |
| Display | 5.7-inch TFT colour touchscreen |
| Power Supply | AC 110 V/220 V (±10%), 50 Hz/60 Hz (±5%) |
| Maximum Power Consumption | 200 W |
| Communication | Ethernet (RJ45) |
| Memory | Unlimited (PC storage via software) |
| Chassis Size | 19-inch, 6U |
| Instrument Weight | Approx. 32 kg |
| Ambient Temperature | 15°C to 35°C |
| Humidity Range | 45% to 75% |
| Pressure Range | 86 kPa to 106 kPa |
| Note: The CCS1000 does not include a built-in single-phase CDN. External coupling/decoupling networks are required for both single-phase and three-phase EUT configurations. | |
| IEC 61000-4-4 — EFT/Burst | |
| Test Voltage | 0.25 kV to 5 kV (±10%) |
| Source Impedance | 50 Ω |
| Rise Time | 5 ns (±30%) at 50 Ω and 1000 Ω load |
| Pulse Duration | 50 ns ± 30% at 50 Ω load; 50 ns −15/+100 ns at 1000 Ω load |
| Pulse Frequency | 0.1 kHz to 1000 kHz |
| Burst Duration | 0.075 ms to 750 ms |
| Burst Cycle | 11 ms to 9999 ms |
| Test Duration | 1 s to 9999 s |
| Phase Synchronisation | 0° to 360°, 1° step or random |
| Trigger Mode | Automatic, manual, external trigger |
| Polarity | Positive, negative, alternative |
| IEC 61000-4-5 — Surge | |
| Test Voltage | 0.3 kV to 10 kV (±10%) |
| Test Current | 0.15 kA to 5 kA (±10%) |
| Voltage Waveform | Front time: 1.2 µs (±30%); time to half value: 50 µs (±20%) |
| Current Waveform | Front time: 8 µs (±20%); time to half value: 20 µs (±20%) |
| Source Output Impedance | 2 Ω |
| Coupling Resistance | 0 Ω, 10 Ω |
| Coupling Capacitance | 9 µF, 18 µF |
| Pulse Period | 8 s to 99 s |
| Number of Tests | 1 to 999 |
| Phase Synchronisation | 0° to 360°, 1° step or random |
| Polarity | Positive, negative, alternative |
| IEC 61000-4-8 — Power Frequency Magnetic Field (optional MFT/VMT module & coils) | |
| Continuous Operating Current | 1 A to 120 A |
| Short-Time Operating Current | 120 A to 500 A |
| Current Waveform | 50 Hz/60 Hz sine wave |
| Current Distortion Rate | <5% |
| Magnetic Field Strength (TCXS111 single-turn coil) | 1 to 100 A/m continuous; 100 to 400 A/m short-term (1–10 s) |
| Magnetic Field Strength (TCXS113 three-turn coil) | 1 to 300 A/m continuous; 300 to 1200 A/m short-term (1–10 s) |
| Test Duration | 1 s to 28800 s |
| IEC 61000-4-9 — Pulse Magnetic Field (optional PMC 1200 module & coils) | |
| Output Magnetic Field Range | 100 A/m to 1200 A/m |
| Output Current | 100 A to 2000 A |
| Waveform Rise Time | 7.2 µs to 10.4 µs |
| Waveform Duration | 18 µs to 26 µs |
| Pulse Cycle | 5 s to 99 s |
| Coil | TCXS111, 1000 × 1000 mm, single-turn, rectangle |
| IEC 61000-4-11 & IEC 61000-4-29 — Voltage Dip & Interruption (optional VVT/VMT module) | |
| EUT Max. Voltage | 300 V AC, 300 V DC |
| EUT Max. Current | AC/DC 16 A continuous; AC 20 A continuous 5 s; 40 A continuous 3 s; 500 A impulse |
| Dip Level | 0% to 100% |
| Interruption Level | 0% |
| Dip & Interruption Duration | 0.1 to 9999 cycles or 1 ms to 9999 ms |
| Dip & Interruption Rise/Fall Time | 1 µs to 5 µs (100 Ω load) |
| Phase Synchronisation | 0° to 360°, 1° step or random |
- Highest surge test voltage in the CCS range — 10 kV with test current up to 5 kA
- Compact 6U chassis at approximately 32 kg — significantly lighter than the CCS800 despite higher surge output
- Covers EFT/burst, surge, power frequency magnetic field, pulse magnetic field, and voltage dip and interruption testing
- 5.7-inch colour TFT touchscreen with front panel operation
- No built-in CDN — requires external coupling/decoupling network for single-phase and three-phase EUT configurations, allowing flexible system build to application requirements
- Compatible with external three-phase CDN control for five-wire EUT configurations (up to 400 A)
- Surge failure detection with front panel LCD alert and automatic operation interrupt
- Surge voltage and current monitoring via front panel BNC outputs
- Test scheduling and sequencing mode for automated multi-level test programmes
- Phase synchronisation control: 0° to 360°, 1° step or random
- Ethernet (RJ45) connectivity for PC remote control and test report generation
- Unlimited memory via PC storage through test software
- Suitable for CE certification testing across communication, telecom, medical, railway, military, avionics and new energy applications
